Oki OKIFAX 1050, Service Manual

Page: 95 / 336

%Table 2.9.3 (3/6) Feature Specifications
Table 2.9.3 (3/6) Feature Specifications
No. Item Specifications
12 Broadcast
(Memory transmission) Max. 55 (OKIFAX 1050), Max. 84 (OKIFAX
2350) and Max.
134 (OKIFAX 2450) remote locations can be
specified by the following means: One-touch
keys (with or without a group list). Two-digit auto
dial codes. Five-keypad dial number (manual
dial locations)
The combination of 5 delayed broadcast and
one immediate broadcast is possible.
When multiple locations are specified for one
broadcast (1) The OKIFAX 1050/2350/2450
prints a broadcast entry re-port, if specified in
operating sequence.
(2) The OKIFAX 1050/2350/2450 can print a
broadcast con-firmation report. (FP + 02 To
enable or disable this print-out)
13 Delayed transmission from
the
memory The fax can automatically transmit documents at
one/five speci-fied times from the memory.
14 Polling transmission
(To be polled) Document(s) placed on the feeder can be
collected by a remote station.
15 Polling reception The fax can collect documents from one remote
station.
16 Transmission preparation
(Hopper) An operator can prepare documents for
transmission even while the fax is enagaged in
message reception. They will be auto-matically
transmitted upon completion of the reception.
An operator can also prepare documents for
transmission during transmission from memory.
17 No toner reception The fax can temporarily store received
messages in memory when toner has run out.
The messages are printed when toner has been
newly supplied or an operator presses the
SELECT FUNCTION key followed by the
one-touch key No. 10 under the LCD message
MSG. IN MEMORY/REPLACE TONER CART.
in the standby mode.
* TF + 11 (To enable or disable this function)