Oki OKIFAX 1050, Service Manual

Page: 68 / 336

will be available during dialling, but the
monitor will be switched off automatically
after the elapse of specified time (about 5
sec.).
03 Error report (MCF) Enables or disables the automatic printing of the OFF
MCF: Message Confirmation Report message confirmation report upon a (0)
communication
error.
ON (1): Printing the error report. An error report
which is different from FP No. 2 is printed
out for each single location.
OFF (0): Disable
04 Echo protection Enables echo supression for poor lines with echo,
OFF
usually during overseas transmissions. This bit (0)
setting controls the following features.
Echo Protection OFF (0) ON (1)
Ignore 1st DIS OFF ON
CED-DIS timer 75 ms 1.5 sec
Tone for echo OFF ON
05 Off-hook bypass Allows two machines to be connected back to OFF
back (0)
for testing purposes.
ON (1): Enable
OFF (0): Disable
06 Long document SCAN Enables the transmission of long-size document OFF
(more than 14" (356 mm).
(0)
ON (1): Unlimited
OFF (0): 14" (356 mm.)
07 Cable equalizer Determining the adequate equalizing level of the
cable. EQL1, EQL2, EQL3 and without EQL are
selectable.
Setting value Setting for OKIFAX 2350 and
OKIFAX 2350 with
14.4 Kbps modem Setting for OKIFAX 1050 and
OKIFAX 2350 with
9.6Kbps modem
0 without EQL without EQL
1 EQL1 EQL3 *1
2 EQL2 EQL3 *1