ML690/ML691 User’s Guide
MENU SETTINGS TABLE
Group
Item
Function
Settings
(defaults are set in
bold italic
)
Set-Up
(
cont
.)
Sleep Mode
Default setting saves power by
having the printer go into sleep
mode; when disabled the printer
never goes into sleep mode.
Enable
, Disable
Sleep Time
Set the idle time before the printer
enters sleep mode (when Sleep
Mode is enabled).
5 min
, 10 min, 15 min, 30 min, 60
min
Pin Control
Regulates the striking force for
multi-part forms. For single
sheets, use “Standard”; for multi-
part forms, use “Special.”
Standard
, Special
Pin Control Select
Regulates the striking force for
multi-part forms. For single
sheets, use “Mode1”; for multi-
part forms, use “Mode2.”
Mode1
, Mode2
Paper End
In default setting when paper end
is detected, printer remains on-
line; if set to Off-line, when paper
end is detected, printer goes off-
line.
On-line
, Off-line
FF Function
Set the feeding operation upon
receiving an FF code after cut
sheet paper is fed.
Eject,
Form Feed
