Oki ML670100, User Manual, Page: 33 / 94

Chapter 3 Setup and Operation
Page 3-3
3.1.1 System Reset Switch (RESET)
Pushing this switch resets the Oki ML670100 CPU Board.
Figure 3.2. System Reset Switch (RESET)
The Board has two types of reset:
• A power on reset produced by applying the power for the first time
• A system reset produced by pressing this push-button switch
Either type initializes the ML670100 on the Board.
Do not press this switch during normal operation, however, as it also resets the JTAG
communications interface unit (Oki Electric ADI Board or ARM Multi-ICE
TM
) joining the
Board to the host computer.
To change to the Angel mode, set the MODE switch to the ANGEL position and press
this button.
! ! ! ! Note ! ! ! !
Pressing this button during remote debugging in either Angel or normal mode can break
the communications link to the development host.
RESET