Oki ML66592 User Manual Download Page 36

Page: 36 / 466

2-5

MSM66591/ML66592 User's Manual

Chapter 2 Description of Pins

At reset (when the

RES

signal is input, the BRK instruction is executed, the watchdog

timer is overflown, or an operation code trap is generated), P6 becomes a high imped-
ance input.

2.8

P7_0–P7_7: Input/Output Pins

8-bit pins of Port 7. I/O can be specified in bit units by the Port 7 mode register (P7IO).

P7_2–P7_7 also function as I/O pins for internal operations (secondary function).

Secondary functions for P7_2–P7_7 are set in bit units by the Port 7 secondary function
control register (P7SF).

For the pins that have secondary functions set by P7SF, I/O settings by P7IO become
invalid.

• ALE (P7_2)

When accessing external memory, this pin outputs a strobe signal to externally latch
the lower 8 bits of the address output from P0.

If the

pin has been set to a "L" level, the pin function automatically changes to the

secondary function.

If both the

and

RES

pins have been set to a "L" level, this pin is pulled up.

•

PSEN

(P7_3)

When accessing external program memory, this pin outputs a strobe signal for the
read operation.

If the

pin has been set to a "L" level, the pin function automatically changes to the

secondary function.

If both the

and

RES

pins have been set to a "L" level, this pin is pulled up.

• PWM0 (P7_4)–PWM3 (P7_7)

PWM0–PWM3 output pins.

At reset (when the

RES

signal is input, the BRK instruction is executed, the watchdog

timer is overflown, or an operation code trap is generated), P7 becomes a high imped-
ance input.

If the

pin (pin 71) is in "L" level when P7_4 (PWM0)–P7_7 (PWM3) are in output

status, these pins output "H" or "L" level, but if the

pin is in "H" level, these pins go

into high impedance status.

Summary of Contents for ML66592



















































































































































































































































































































































































































































































Search results

Summary of Contents for ML66592

Reviews:

Brands by name

Popular brands

Oki ML66592, User Manual

Search results

Summary of Contents for ML66592

Reviews:

Brands by name

Popular brands