Oki Microline 320 Turbo D1, Handbook, Page: 78 / 119

ML320/321 Turbo Printer Handbook 71
Parallel I/F
Serial I/F *
5
CSF Bin 1 *
4
CSF Bin 2 *
4
Buffer Print, Buffer Clear, Invalid
+5V, Open
Invalid, Valid
None, Odd, Even
8 Bits, 7 Bits
Ready/Busy, X/On/X-Off
No, Yes
SSD-, SSD+, DTR, RTS
19200 bps, 9600 bps, 4800 bps, 2400 bps,
1200 bps, 600bps, 300 bps
Valid, Invalid
Ready on Power Up, Ready on Select
200 ms, 1 sec.
6 LPI, 8 LPI
Valid, Invalid
13.6", 8"
11", 11
2
/
3
", 12", 14", 17", 3", 3.5", 4", 5.5", 6",
7", 8", 8.5"
6LPI, 8LPI
Valid, Invalid
11", 11
2
/
3
", 12", 14", 17", 3", 3.5", 4", 5.5", 6",
7", 8", 8.5"
I-Prime
Pin 18
Auto Feed XT *
3
Parity
Serial Data 7/8 Bits
Protocol
Diagnostic Test
Busy Line
Baud Rate
DSR Signal
DTR Signal
Busy Time
Line Spacing
Bottom Margin
Page Width *
Page Length
Line Spacing
Bottom Margin
Page Length
Group Item Setting
* ML 321 Turbo only
*
1
Appears only when IBM Proprinter emulation is selected.
*
2
Appears only when Microline emulation is selected.
* 3 Appears only when Epson FX emulation is selected.
*
4
Appears only when optional Cut Sheet Feeder Accessory is installed.
* 5 Appears only when optional Serial Interface is installed.
*
6
Applicable only when the Roll Paper Stand is installed.