Oki Microline 320 Turbo D1, Handbook, Page: 43 / 119

36 Operation
Here is a summary of the buttons active in the Menu Mode:
1. GROUP button: Press to scan through groups of listings. Each time you press the
GROUP button, a line will print, showing the next group in the Menu. To go back
one group, hold the SHIFT button while pressing the GROUP button.
2. ITEM button: Press to scan through items for a particular group. Each time you
press the ITEM button a line will print, showing the next item within the group. To
go back one item, hold the SHIFT button while pressing the ITEM button.
3. SET button: Press to change setting for the items. Each time you press the SET
button, a line will print across the page showing the next setting for that item.
Keep pressing the button until the setting you wish to engage appears. To go back
one setting, hold the SHIFT button while pressing the SET button.
4. PRINT button: Press to print out listing of current settings for each items, group
by group.
Resetting Menu to Factory Defaults
To reset your printer Menu to the factory settings, turn the printer off, then hold the
SEL and LF buttons while turning it back on again.
EXIT
POWER
SEL
SEL
ALARM
FF/LOAD PARK
SET
TEAR LF
MENU
Micro Feed
Down
Micro Feed
Up
GROUP PRINT
QUIET
ITEM
MENU SHIFT TOF
Hold while turning printer on