SENDING/RECEIVING A FAX
- 65 -
1
2
3
4
5
6
ORIGINAL SIZE
Set the scan size of the original.
Memo
• If the recipient’s fax machine is not capable of receiving
originals of B5 size, this equipment may reduce that size
before sending it. To avoid this, when the original to be set is
B5 size, specify A4 size respectively.
EXPOSURE
Set the density at which the original is to be scanned.
ECM
Switch the ECM (Error Correction Mode) communication ON or
OFF. ECM is an internationally standardized communication
mode that automatically corrects errors that occur during fax
transmissions. With this setting option ON, even when the
transmitted data have been affected by noise during
communication, this mode allows good communication without
image distortion by automatically resending the parts that have
been affected.
Note
• Both the sender and the receiver must have the ECM
function to make ECM communication available.
• When affected by noise during communication,
communication time is slightly longer than usual. Even when
the ECM communication is used, an error may occur
depending on the line status.
• The ECM communication is not available for voice
communication.
QUALITY TX
Switch Quality TX ON or OFF. When this mode is set to ON,
originals are sent at a slower speed than usual and the
chances of errors occurring decrease.
MAIL BOX COMMUNICATION
For the communication compatible with ITU-T (International
Telecommunications Union-Telecommunications) standards,
specify a subaddress or password to be sent to the recipient's
fax machine. (Up to 20 digits can be entered.)
Memo
• To use this function, the recipient’s fax machine must be
capable of setting an ITU-T compatible subaddress or
password.
INTERNET FAX
This is not used for sending a standard fax.
AUTO:
The size of the original is automatically
determined before the original is scanned.
MIXED
ORIGINAL
SIZES:
Select this function to load the originals with
different width into the RADF (Reversing
Automatic Document Feeder).
Specified
size:
The original is scanned at the preset size
regardless of its actual size.
AUTO:
This equipment automatically detects the
contrast of the original, and scans it with the
optimum density.
Manual:
Press
or
to set the desired
contrast.
SUB
(Subaddress):
Information to send data of the original
to the fax machine.
SEP (Selective
Polling):
Information to retrieve data of the
original from the fax machine.
SID (Sender
Identification):
Password for SUB.
PWD (Password):
Password for SEP.
SUBJECT:
The subject of the Internet Fax
BODY:
The body of the Internet Fax
Summary of Contents for MC780 series
