44292401TH Rev.1
80 /
Oki Data CONFIDENTIAL
MAINTENANCE
7.3.10
USB board (USB)
1.
Remove the rear cover.
See P.
76
2.
Remove the right cover.
See P.
76
3.
Remove the FAX control board.
See P.
80
4.
Disconnect the connector (CN1) [1]
from the MFP board.
5.
Remove the harness [2] from two
wire saddles [1].
6.
Remove two screws [1], and remove
the USB board [2].
A034F2C073DA
[1]
A0HFF2C518DA
[1]
[2]
A034F2C075DA
[1]
[2]
6.3.9
FAX control board (FAXB)
NOTE
6.3.10
USB board (USB)
7.3.9
FAX control board (FAXB)
NOTE
• For
MC160n
, boot data is written to the MFP board and firmware data is
written to the FAX control board. To avoid any problem, be sure to replace both the
MFP board and FAX control board at one time.
1.
Remove the rear cover.
See P.
76
2.
Remove the right cover.
See P.
76
3.
Disconnect the connector (P1) [1].
4.
Disconnect two flat cables (P6, P7)
[2].
5.
Unhook the tab [3], remove the har-
ness guide [4].
6.
Remove four screws [1], and remove
the FAX control board [2].
NOTE
• When installing the FAX control
board, each of the screws indicated
by the arrows also fixes an earth
terminal.
A034F2C071DA
[1]
[2]
[3]
[4]
A034F2C072DA
[1]
[2]
Summary of Contents for MC160MFP
Page 1: ...MC160MFP Maintenance Manual 011710A...
Page 18: ...44292401TH Rev 1 17 Oki Data CONFIDENTIAL MC160n Main body THEORY OF OPERATION...
Page 55: ...44292401TH Rev 1 54 Oki Data CONFIDENTIAL Auto Document Feeder Unit THEORY OF OPERARTION...
Page 61: ...44292401TH Rev 1 60 Oki Data CONFIDENTIAL MC160n Main body FIELD SERVICE...
