Configuring Copy Settings
- 77 -
Copying
2
Making Duplex Copies (Duplex
Copy)
You can copy 1-sided (simplex) and 2-sided
(duplex) documents on to one side (simplex) or
both sides (duplex) of a sheet of paper. You can
also select the binding position from either long-
edge or short-edge binding.
Specify the appropriate orientation of the
document in [
Direction
] beforehand to get the
copy result you want.
Note
z
Use standard size plain paper for duplex copies. Using
non-standard paper may cause a paper jam in the duplex
unit of your machine.
Duplex printing cannot be done while paper is fed by
Manual Feeder in MB461.
Reference
z
For details on the available paper for your machine, refer
to
z
For details on how to configure the [
Direction
] setting,
"Changing Image Orientation of Document
Long-Edge Binding
Copies your document to be bound along the
long edge of the paper.
Short-Edge Binding
Copies your document to be bound along the
short edge of the paper.
Reference
z
To set margins for binding, refer to the User's Manual
Advanced.
Enabling Duplex Copies
1
Press the to enter the [
Change
Settings
] menu.
2
Press the to select [
Duplex Copy
]
and then press .
3
Press the to select the desired value
and then press .
4
Press the until the start screen is
displayed.
Note
z
You can copy
"
duplex to duplex
"
or
"
duplex to simplex
"
copies only when scanning the documents from the ADF.
Memo
z
When making duplex copies using the document glass, the
continuous scan mode is automatically enabled. Follow the
on-screen instructions.
Adjusting Copy Density
(Density)
You can adjust the copy density from 7 levels.
1
Press the to enter the [
Change
Settings
] menu.
2
Press the to select [
Image Settings
]
and then press .
3
Check that [
Density
] is selected and
then press .
4
Press the or to select the desired
density and then press .
Memo
z
[
0
] is the standard value. To darken the document
image, select [
+1
], [
+2
] or [
+3
] (most dense).
Conversely, to lighten the document image, select
[
-1
], [
-2
] or [
-3
] (least dense).
5
Press the until the start screen is
displayed.
Changing Document Type
(Document Type)
You can select the document type to make copies
at the most suitable quality for your needs.
1
Press the to enter the [
Change
Settings
] menu.
OK
Settable Values for Printing Method:
OFF (Simplex)*
Simplex document
→
Duplex
LE
Simplex document
→
Duplex SE
Duplex document
→
Duplex printing
Duplex
LE
→
Simplex printing
Duplex
SE
→
Simplex printing
*indicates the factory default.
Settable Density Values:
+3 +2 +1 0* -1 -2 -3
*indicates the factory default.
OK
OK
OK
OK