26
• If the CHARGE lamp does not light at the start of charging,
make sure the battery pack is firmly mounted in the charger.
Poor mounting of the battery pack may result in faulty
charging.
• When a fully charged battery pack is placed into the battery
charger, the CHARGE lamp turns on and then off.
• When charging a battery pack that has not been used for a
long time, the CHARGE lamp may blink for a while. This does
not indicate an error. You can continue charging.
• The battery pack can be recharged about 300 times (when
used at normal temperatures). If the battery pack is fully
charged but runs out quickly, replace it with a new battery.
Charging Time
It takes about 1.5 hours for a fully discharged battery pack to
return to a fully charged state.
Charging with the Optional AC Adapter
Note:
These instructions assume that the battery is installed in
the printer (see “Installing the Battery Pack” below.
1. Remove the printer’s DC input jack (1) cover and connect the
DC output terminal (2) on the AC adapter (3) to it.
