Oki LP441s User Manual Download Page 54

Page: 54 / 76

RS-232C Settings

DIP Switch

Settings

Function

Procedure

OFF OFF OFF OFF

RS-232C Normal mode

With printer turned off and cover closed:
• Press and hold the FEED button.
• Press the POWER button to turn on the printer

in the normal mode.

OFF OFF OFF OFF

Test Print, RS-232C Mode

With printer turned off and cover closed:
• Press and hold the FEED button.
• Press the POWER button to turn the printer on

in the Test Print mode.

OFF OFF OFF OFF

RS-232C Default Setting Mode

With printer turned off:
• Open the cover.
• Press and hold the PRINT button .
• Press the POWER button to turn the printer on.

OFF OFF ON ON

RS-232C Hex Dump Mode

With the printer turned

off

and the cover closed:

• Press the POWER button to turn the printer on

with the hex dump mode engaged.

Note:

A small label may produce a large amount

of data when printing a Hex Dump.

OFF OFF OFF ON

RS-232C Font Download

With the printer turned

off

and the cover closed:

• Press the POWER button to turn the printer on

OFF

Summary of Contents for LP441s













































































Search results

Summary of Contents for LP441s

Reviews:

Related manuals for LP441s

Brands by name

Popular brands

Oki LP441s, User Manual

Search results

Summary of Contents for LP441s

Reviews:

Related manuals for LP441s

Brands by name

Popular brands