manualshive.com logo in svg

Oki LP441s, User Manual

Share
Download
Oki LP441s User Manual Download Page 53

53

Interface Specifications

Through a combination of DIP switch settings and turning the printer ON with 
certain buttons held down, you can enable or disable special functions and 
features.

Warning:

Never connect or disconnect interface cables  

(or use a switch box) with power applied to 

either the  host or the printer. This may cause 

damage to the interface circuitry in the printer/

host and is not covered by the warranty. 

On-line Command Compatibility Settings

DIP Switch 

Settings

Function

Procedure

1

2

3

4

ON ON ON ON

Switch to MB200 emulation command 
compatibility

With printer turned off:
• Open  the  cover.
• Press and hold PRINT button.
• Press the POWER button to turn the printer on. 

ON ON ON ON

Switch to SBPL command compatibility

With printer turned off:
• Open  the  cover.
• Press and hold FEED button.
• Press the POWER button to turn the printer on.

OFF

ON

Summary of Contents for LP441s













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands