Oki ES845MFP User Manual Download Page 93

Page: 93 / 182

Operation > 93

If required, enable receive protect:
(a)

Press Rx Protect.

(b)

Press ON.

(c)

Press Enter.

If required, enable concurrent print:
(a)

Press Auto Print.

(b)

Press ON.

(c)

Press Enter.

If required, enable overwrite permission:
(a)

Press OverWrite.

(b)

Press ON.

(c)

Press Enter.

If required, enable deletion of document after sending:
(a)

Press Erase Tx Doc.

(b)

Press ON.

(c)

Press Enter.

If required, register an ID Code:
(a)

Press I.D.Code.

(b)

Enter an ID Code number (4 digits) using the numeric keypad.

(c)

Press Enter.

NOTE
When Rx Protect is set to ON, only polling transmission is available.

When Rx Protect is set to ON, Auto Print and OverWrite features are disabled.

NOTE
When Auto Print is set to ON, a document received in the notice board is
printed.

NOTE
When OverWrite is set to ON, the previous-stored document is overwritten by
the received document.

NOTE
When Erase Tx doc is set to ON, the document is deleted after a polling
transmission.

NOTE
The ID code is not displayed, write it down and keep it safe!

Summary of Contents for ES845MFP























































































































































































Search results

Summary of Contents for ES845MFP

Reviews:

Related manuals for ES845MFP

Brands by name

Popular brands

Oki ES845MFP, User Manual

Search results

Summary of Contents for ES845MFP

Reviews:

Related manuals for ES845MFP

Brands by name

Popular brands