- 37 -
2. Setting Up
Connect this machine to a network via a wireless LAN access point.
1
Check if your wireless LAN access point matches the following requirements.
Standards: IEEE 802.11 a/b/g/n
Access method: Infrastructure mode
2
Check if the wireless LAN access point supports WPS.
If it does not support WPS, check the SSID and encryption key by referring to the
instruction manual that is included in the wireless LAN access point or other
documents.
• An SSID is also called a network name, ESSID or ESS-ID.
• An encryption key is also called a network key, security key, password, or Pre-shared Key.
Go to the procedure to connect the telephone cable.
A USB cable (Hi-Speed USB 2.0) is not supplied.
1
Prepare a USB cable.
If you want to connect in USB 2.0 Hi-Speed mode, use a Hi-Speed USB 2.0 USB cable.
2
Check that the machine and computer are turned off.
3
Open the interface cover on the back side of the machine pressing the center
part of it.
4
Insert one end of the USB cable into the USB interface connector on the
machine.
Connecting over a Wireless LAN Connection (Only When the
Wireless LAN Module is Mounted)
Connecting with a USB Cable