manualshive.com logo in svg

Oki C9600hdn, Network And Configuration Manual, Page: 17 / 264

Share
Download
Oki C9600hdn Network And Configuration Manual Download Page 17

 OkiLAN 8200e Network User’s Guide

17

Using Quick Setup

      

cd.jpg

  

1. Insert the Drivers CD provided with your printer into the CD-ROM 

drive and wait for it to autorun.

If the Menu Installer does not start automatically, click 
[Start] 

→

 [Run] 

→

  [Browse]. Browse to your CD-ROM and click 

[Install] 

→

 [Open] 

→

 [OK].

2. Click [Next] to accept the Software License Agreement, then select 

your language.

3. Click [Custom Install].
4. Click [Network Software].
5. Click [Installation/Config].
6. Click [Admin Mgr / Quick Setup].

The Setup Utility opens.

7. Select the language.
8. Click [OKI Device Quick Setup].

The Welcome window appears.

9. Click [Next] and follow the on-screen instructions.

  

10. When you are done making your selections, review them and if they 

are correct, click [Execute].

NOTE

The NetWare Client 32 or IntranetWare Client should 
be installed on the PC used for the creation of network 
queues.
Installation enables the user to create network queues 
and perform other functions.

Summary of Contents for C9600hdn









































































































































































































































































Reviews:

No comments