manualshive.com logo in svg

Oki C9600hdn, Network And Configuration Manual, Page: 125 / 264

Share
Download
Oki C9600hdn Network And Configuration Manual Download Page 125

 OkiLAN 8200e Network User’s Guide

125

Utilities:
Oki LPR Printing Utility

The Oki LPR Utility is a utility that allows sending data to printers connected 
to the network via TCP/IP.
The utility redirects printing data to the lpr port of the specified IP address.

System Requirements

Oki LPR works with the following Windows Operating Systems, with TCP/IP 
protocol installed:

•

XP

•

2000

•

Me

•

98

•

NT4.0 

Installing Oki LPR

Installation consists of three steps:

•

Step 1: Load the Printer Driver

•

Step 2: Install the Utility

•

Step 3: Add the Printer to the Utility

Step 1: Install the Printer Driver

Install the printer driver on local port LPT1.

     

cd.jpg

  

1. Insert the Drivers CD provided with your printer into the CD-ROM 

drive and wait for it to autorun.

If the Menu Installer does not start automatically, click 
[Start] 

→

 [Run] 

→

  [Browse]. Browse to your CD-ROM and click 

[INSTALL.EXE] 

→

 [Open] 

→

 [OK].

2. Click [Next] to accept the Software License Agreement, then select 

your language.

Summary of Contents for C9600hdn









































































































































































































































































Reviews:

No comments