Oki C910 Service Manual Download Page 89

Page: 89 / 282

Oki Data CONFIDENTIAL

44043511TH Rev.2

88 /

OFF

(2) USB Connection

1. Prepare a USB cable.

Note!

•

No cables are included with the product. Prepare a cable.

•

A cable to be prepared must be a USB cable.

•

For connecting the printer in USB 2.0 Hi-Speed mode, use a Hi-Speed USB

cable.

2. Power off printer and personal computer.

Memo: The USB cable can be plugged in and off with the printer powered on. For the

purpose of printer driver and USB driver installation to be performed later, power
off the printer.

3. Connect personal computer and printer.

(1) Plug a prepared USB cable in the USB interface connector of the printer.

(2) Plug the cable in the USB interface connector of the personal computer.

Note!

Be careful not to plug the USB cable in the network interface connectors; a

problem with the printer may result.

USB interface connector

USB cable

Summary of Contents for C910



























































































































































































































































































Search results

Summary of Contents for C910

Reviews:

Oki C910, Service Manual, Page: 89 / 282

Search results

Summary of Contents for C910

Reviews: