C7350 User’s Guide > 170
D
UPLEX
UNIT
NOTE
The duplex unit comes as standard with the C7350dn and
C7350dtn.
Installation
1.
Switch off the printer and disconnect the power cable.
2.
Open the front cover (1).
3.
Insert the duplex unit (2) into the printer engaging the
sides of the duplex unit in the slots in the printer.
4.
Gently slide the duplex unit (2) fully into the printer.
5.
Close the front cover (1).
6.
Connect the power cable and switch the printer on.
The printer will automatically configure to include this option.
However, you can manually set it as follows:
1.
Press the
Menu
button until PRINT MENU is displayed,
then press the
Select
button.
2.
Press the
Item
button until DUPLEX is displayed.
3.
Press the
Value
button until ON is displayed then press
the
Select
button. An asterisk (*) appears to show that
duplex has been set to on.
4.
Press the
Online
button to turn the printer back on line.
Summary of Contents for C7350n
