Oki C650/ES6450, Basic Operation Manual

Page: 98 / 180

Changing settings from the operator panel
- 98 -

[Auto Config]: The power is turned off automatically if the machine has not been used for a certain period
of time, except in the following situations.

When the LAN cable is connected to the network interface connector

When the wireless LAN is enabled

[Enable]: The power is automatically turned off if this machine has not been used for a certain period of
time.

[Disable]: Disables the Auto Power Off function. The power does not turn off automatically.

Auto Power Off does not work in the following cases.
With the factory default settings, Auto Power Off does not work when a network (wired/wireless) is connected.
When an error has occurred
Follow the procedure below to change the Auto Power Off setting.
1
Check that "Ready To Print" appears on the display.
If the machine is in the power save mode, press «POWER SAVE» to restore.
2
Press the scroll button ▼ on the operator panel several times to select [Admin Setup], and press
«OK».
3
Input the admin password using the numeric keypad, and press «OK».
Admin password (P.114)
4
Press ▼ several times to select [Power Setup], and press «OK».
5
When [Auto Power Off] is displayed, press «OK».
6
Press ▲ or ▼ to select [Auto Config], [Enabl e] or [Disable], and press «OK».
7
Press «ON LINE» to return to the standby screen.