9
>
The numbers entered are not displayed on the Enter PIN ID screen, being
replaced by '*'.
>
The PIN ID entered can be confirmed by either the Start button or the Enter
key.
>
The MFP supports the following 2 kinds of PIN ID.
A
DMINISTRATOR
PIN ID
This is the PIN ID for the system administrator(s).
If a PIN ID is registered as an administrator, the Admin password entry screen
is displayed, and, when an Admin password is entered, it will be authenticated
as an administrator.
U
SER
PIN ID
This is PIN ID for general users.
If a PIN ID is registered as a general user, the function selection screen is
displayed, also after PIN ID entry the function selection screen is displayed.
I
NVALID
PIN ID
If the PIN number entered is invalid, Incorrect Password is displayed for 3 seconds
and the display reverts to the Enter PIN ID screen.
L
OGOUT
OPERATION
If Logout is selected or an Operation Time-out occurs, the display reverts to the Enter
PIN ID screen.
L
OGOUT
BY
USER
With Access Control enabled, Logout options are displayed in the Menu on the Mode
Selection screen.
When the cursor is moved to Logout and the Enter key is pressed, the display reverts
to the Confirm Logout screen.
If Yes is selected with the Enter key on the Confirm Logout screen, the display reverts
to the Enter PIN ID screen.
O
PERATION
T
IME
-
OUT
>
When the MFP operation panel is left inactive for a prescribed length of time
(Operation Time-out), the display automatically reverts to the Idle screen if
Access Control is disabled.
>
If an error state occurs, Operation Time-out is disabled.
>
After Operation Time-out, the display automatically reverts to the Enter PIN ID
screen if Access Control is enabled.
