Troubleshooting and maintenance — 61
Misfeed in the duplex module
1.
Unlatch the duplex module and slide it to
the left. Gently move the module away
from the machine.
2.
If the duplex module has an exit tray,
rotate it up out of the way and open the
cover of the duplex module. If no exit tray
is attached, just open the cover of the
duplex module and ignore any reference
to the tray in the following steps.
3.
While holding the exit tray up, remove the
misfed paper. If paper is misfed in the
upper part of the duplex module, gently
remove it, taking care not to tear the
paper. Repeat the procedure if paper is
misfed in the lower part of the duplex
module. .
4.
Close the cover of the duplex module and
lower the exit tray.
5.
Gently close the duplex module.
6.
After closing the duplex module, confirm
that the misfeed message is cleared and
that the normal display appears.
Misfeed in the bypass tray
1.
Unlatch the duplex module and slide it to
the left. Gently move the module away
from the machine.
2.
Remove the misfeed from the bypass tray.
Be careful not to tear the misfed paper
during removal.
3.
Gently close the duplex module. After
closing the duplex module, confirm that
the misfeed message has been cleared
and the normal display appears.
Summary of Contents for B8300
