Oki B721 User Manual Download Page 106

Page: 106 / 156

- 106 -

Other Error Messages

Troubleshooting

Error

code

Message

<ATTENTION>

indicator

Cause/Remedy

Warning

□

Cannot read the file

Press ONLINE Button

Lights up

Cannot read the file from USB Memory

while printing from USB Memory. The USB

Memory may be pulled out, or damaged, or

file cannot open.

Error

480

Remove Paper

Facedown Stacker

Please see HELP for details

Blink

The printed paper is overfilled on the paper

stacker of the printer unit.

Error

420

Press ONLINE Button for Restoration

Memory Overflow

Please see HELP for details

Blink

Memory capacity overflows.

Error

517

Wireless startup failed

Press ONLINE Button

Please see HELP for details

Blink

An error occurred at the communication

with wireless bridge. For example, response

timeout, etc.

This status only for wireless LAN model.

Error

504

This wireless firmware version does

not operate on this device

Press ONLINE Button

Please see HELP for details

Blink

The major version is not the same with

wireless bridge.

This status only for wireless LAN model.

Error

505

Wireless settings are incomplete

Press ONLINE Button

Please see HELP for details

Blink

Wireless LAN can not startup. Some setting

need to be re-configured.

This status only for wireless LAN model.

Error

506

(ONLINE)

Not connected to wireless access

point

Press ONLINE Button

Please see HELP for details

Blink

Can not setup communication with an

Access Point(there is not an usable AP).

This status only for wireless LAN model.

Error

(ONLINE)

Check Data

Message Data Write

Error<%CODE%>

Lights up

Indicates that writing of message data to be

uploaded has been failed.

Error

519

(ONLINE)

Press ONLINE Button for Restoration

Receiving Data Timeout

Please see HELP for details

Blink

When receiving data by Port9100, LPR, FTP,

IPP, WSD, or Email, a timeout occurred.

Error

(ONLINE)

Firmware Update Error

Please try again

If network doesn’t work, please try

firmware update over USB

Lights up

FW Update was failed.

When this error occured, the FW Update

needs to be executed again, and the printer

needs to keep ONLINE.

Error

581

Faceup Stacker Open

Duplex Not Available

Please see HELP for details

Blink

It is occurred when duplex printing pages

are added at the faceup stacker cover

opened.

Error

440

441

442

Install Paper Cassette

%TRAY%

Please see HELP for details

Blink

Indicates removal of the paper cassette of

Tray 1 that is a paper path in attempting to

print from Tray 2, 3, or 4.

Error 440 : Tray1

Error 441 : Tray2

Error 442 : Tray3

Summary of Contents for B721





























































































































































Search results

Summary of Contents for B721

Reviews:

Related manuals for B721

Brands by name

Popular brands

Oki B721, User Manual

Search results

Summary of Contents for B721

Reviews:

Related manuals for B721

Brands by name

Popular brands