B6500 Network Guide> 60
S
ETTING
IP A
DDRESS
When the printer is connected to the network, it retrieves the IP
address automatically from the DHCP server once it is switched on.
If the DHCP server is not available or not in use, use one of the
following methods to retrieve and set the IP address.
•
Set the IP address from the control panel
•
Use the IP address Setup Tool in the CD-ROM bundled with
this printer.
Important:
• When using the DHCP server, use WINS (Windows
Internet Name Service) server at the same time.
• The address information can also be retrieved
automatically via the BOOTP or RARP servers. For such
cases, change the [Get IP Address] selection on the
control panel to [BOOTP] or [RARP].
• Depending on the network environment, you may need to
set the subnet mask and gateway address.
• Please check with your network administrator if you have
any questions concerning your network environment.
Refer to:
• Details on retrieving IP address: Reference Guide
• IP Address Setup Tool: Network Print Environment User
Guide
• Web browser: Reference Guide
NOTE
>
You can change the IP address using a web browser.
>
You can check the current IP address, subnet mask and
gateway address settings from the [System Settings List].
>
This section explains how to set IP address from the
control panel.
NOTE
• If you have made a mistake when operating the control
panel, press the <MENU> button to restart.
Summary of Contents for B6500dn
Page 1: ......
Page 4: ...B6500 Network Guide 4 ...
Page 8: ...B6500 Network Guide 8 ...
Page 62: ...B6500 Network Guide 62 ...
