Oki B6200 Series, Maintenance Manual

Page: 29 / 679

1 - 13
Chapter 1 Troubleshooting
016 716
Unable to spool TIFF
Data
Cannot spool TIFF file due to lack of memory.
If HDD is not installed, install it.
If it is installed, add the capacity.
-
016 721 Other Error
Unexpected error is caused when printing.
Causes maybe as follows.
1. It is printed by auto tray selection while [Paper priority] is set to [no
setting] for all paper types in the common menu [Printing settings].
2.ESC/P command errorCheck printing data
-
016 726 PDL Auto Switch Fail
Printing language cannot be selected automatically when printing
mode is set to [Auto].
Causes maybe as follows.
1. PostScript Data is sent without installing PostScript software.Install
PostScript software kit.
2. PDF file is directly sent to the machine by using LPR while the
internal HDD is not installed though PostScript software is installed.
Install intertnal HDD.
3. Data of ART
Ⅳ
, 201H, ESC/P, HP-GL, or HP-GL/2 is sent with the
printing mode [Auto] when ART
Ⅳ
/Emulation kit is not installed. Install
ART
Ⅳ
/ Emulation kit. (HP-GL and HP-GL/2 can be used by
PostScript software kit.)
-
016 728 Unsupported TIFF Data
Unsupported tags are included in TIFF file.
Check printing data.
-
016 729 TIFF Data Size is too Big
Color standards and resolution of TIFF data are specified over the
valid range.
Change Color standards and resolution of TIFF file, and print out
again.
-
016 730
Unsupported ART
Command
A command which is not supported by ART is detected.
Check the printing data, delete the command to cause error, and
indicate printing.
-
016 731 Invalid TIFF Data
TIFF data is not sufficient.
Check the printing data, and indicate printing.
-
016 732
Data is not printed when
the specified form is not
registered in the <form
composition error>
emulation.
Decomposer detects that the specified form is not registered.
Resend the form data.
-
016 744
Unsupported function is
include in the sent PDF When using PDF1.3, Transparency or JBIG2 is included in PDF file.
Print out through a driver by using Acrobat Reader.
-
016 748
When accessing the
personal box, detect
FULL status and end the
job
When accessing HD, detect FULL status and end the job.
Make capacity of HD, and print again.
-
016 749
Detect <JCL/PJL syntax
error> the syntax of JCL/
PJL command error
Detect syntax error of JCL/PJL command.
Correct the command.
-
016 751 PDF Error
When processing PDF Bridge, errors such as syntax error, usage of
undefined command, parameter error, breakage of PDF file, or internal
error of PDF decomposer are caused.
Open PDF file by using Adobe Acrobat Reader, and execute printing
from [Print] under [File].
-
016 752 PDF Short of Memory
While processing PDF Bridge, detect lack of memory.
If the Contents bridge is used, change the setting of [Print mode] in the
[Contents Bridge] dialog box.
If [High quality] is selected, change to [Normal].
If [Normal speed] is selected, change to [High speed].
-
016 753
PDF Password
Mismatched
When processing PDF files protected by password, the password for
UI panel setting and the password specified by XPJL (set by Contents
Bridge Utility) are not identified.
Set the correct password by a printer or Contents Bridge Utility, and
execute printing again.
-
Chain Link Fault Items Conditions of detect/Methods of treatment Ref FIP