51 > B401/B411/B431
5.
Replace the tray in the printer.
Automatic feed sequence
With no optional feed trays installed, the Autotray function in the
Print Menu is set by default to ON
and the Tray sequence function
is set to DOWN. In this way, if a tray runs out of paper, automatic
feed will take place in the order Tray 1, Tray 2 (if fitted), Multi
Purpose Tray or the Manual Feed Tray, provided that these trays
are set up for identical media. Also, configure the media size and
media weight for the respective trays in the operator panel or
Configuration Tool, depending on your printer model.
Note
If you have the optional second paper tray (Tray 2)
and you are printing from the first (upper) tray (Tray
1), you can pull out the second (lower) tray to reload
it. However, if printing from the second (lower) tray,
do not pull out the first (upper) tray as this will result
in a paper jam.
Summary of Contents for B401
