Oki 10i, Help Manual

Page: 27 / 40

Help Guide 27
English
Cover is open. Press down firmly to close.
EEPROM ID check error. Press
RECOVER
to reset EEPROM to factory default.
Abnormality found in the printer. Switch
printer off then on again to clear, if problem
persists, contact service representative.
Abnormality found in the controller. Switch
printer off then on again to clear, if problem
persists, contact service representative.
aaaaaaaa = error address
Flash SIMM sum check error.
Message Status
Displayed in window for one second after
switching on power, for test purposes.
Printer is in initialization mode after
switching on, prior to on- line mode.
Printer is requesting
RESET
button to be
pressed for more than 2 seconds, to write
new menu data to EEPROM.
Message Status
Ready
ERROR 0n
aaaaaaaa
Ready
ERROR nn
EEPROM
RESETING
Ready
COVER
OPEN Ready Ready
Ready INITIAL-
IZING
Ready RESET TO
SAVE
SIMM-ROM
ERROR
123
123
Ready
10ihgb.p65 01/04/98, 10:30 27