AF OUT
LOW/HI
DC INPUT
12 15V/0.6A
AF OUT
LOW/HI
DC INPUT
12 15V/0.6A
Setup Procedure
Signal Connections
1. Connect 6.3 mm mic jack from “Unbalanced AF Output” to
amplifier’s “MIC IN”
and
set
“impedance”
at
“LOW”
.
Or
connect
6.3 mm mic
jack
from
“unbalanced
AF Output”
to
amplifier’s “LINE IN”
and
set
“impedance”
at
“HI”
. (
The
same
way can
be
applied
in
EJ-701DR
-
PLUS
/
EJ-702DR
-
PLUS
.)
Amplifier
2. If using
XLR
mic
jack,
connect
it
from
”Balanced AF Output”
to
amplifier’s “AUX IN”.
In order to prevent from the impedance from being too high thus producing
unexpected noise, please set “impedance”
at
"LOW”
if
you
are
connecting
a
mic
jack
to
a “low input”
in
the
subordinate device.
3
If your subordinate device is with general input socket (e.g., LINE IN, AUX IN
, etc), please set ”impedance”
at
“HI”
to
avoid
too
low
-
volume
output
.
AF Impedance Selection (HI / LOW Control)
Remark: AF Impedance Selection only controls
Unbalanced AF Output (6.3 mm jack).
