2
GB
| Operating Instruction
Hedge Trimmer
Introducing the hedgetrimmer
Technical data
HS 4514 Okay
(FHS 1545 Ultralight)
HS 5514 Okay
(FHS 1555 Ultralight)
Operating Voltage
V~
230 - 240
230 - 240
Nominal Frequency
Hz
50
50
Nominal Consumption
W
500
550
Cutting movements
min
-1
2500
2600
Cutting length
mm
450
550
Cutting capacity
mm
18
24
Weight (without flex)
Kg
1,95
2,6
Noise Pressure Level L
pA
according to EN 60745-1 dB (A) 86,8
K=0,6 dB(A)
87,4
K=0,6 dB(A)
Vibration according to 60745-1
m/s
2
2,6
K=1,5 m/s²
3,6
K=1,5 m/s²
Class of protection: II/DIN EN 60745/VDE 0740
Emissions
-
The specified vibration emission value was measured by a standardized test methods and can compare with other
power tools are used.
- The specified vibration emission value can also be necessary for the assessment of work breaks are used.
-
The specified vibration emission value can vary during the actual use of the electric tool by specifying the
value, depending on the way how to use the power tool.
- Note: You create the privilege against vascular pulsations of the hands in time breaks.
The noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require noise
protection (e.g. wearing of ear protectors).
Attention: Noise protection! Please observe the local regulations when operating your device.
Interference suppressed in accordance with EN 55014, EN 61000-3-2, EN 61000-3-3.
We reserve the right to make changes to the technical specifications
.
The devices are manufactured in accordance with the provisions of EN 60745-1and EN 60745-2-15 and fully comply with
the provisions of the German Product Safety Act.
