manualshive.com logo in svg

Okamura 865XTW, Assembly And Instruction Manual, Page: 7 / 8

Share
Download
Okamura 865XTW Assembly And Instruction Manual Download Page 7

Changing the Desk Height

Before Assembly

Removing the Desktop Shelf

For the remounting procedure, see steps 6 to 10 on the previous page.

Removing the Inner Panel

Before assembling the desk, first remove all items on the desktop panel and desktop shelf.
Next, check page 3, and determine what shape (height) will be set.

Desktop shelf 

rear panel

Connecting bolt

Right outer panel

Right inner panel

Ring

Connecting bolt

Be sure always perform disassembly or assembly using two or more people.

Also, be careful that you do not lose any sections or parts.

Fitting the 3-drawer Wagon Unit

When Removing a Drawer

If the desktop panel is a height of JIS2 or JIS3, then the top drawer unit of the 

desk wagon must be separated. The separated unit can be mounted to the rear 

as shown in the figure.

To remove a drawer, remove the 

screws from the inside of the drawer 

frame panel, and then pull out the 

drawer in the forward direction.

Drawer unit

Screws

*For the assembly 

  procedure, see the

 instructions for the 

 desk wagon.

Flip over the desk, and remove the connecting bolts and 

rings from the right and left side panels of the desk.

Remove the inner panel, and remount the inner panel to 

the new height.

Left outer panel

Left inner panel

Remove the connecting bolts from 

the desktop shelf rear panel, and 

remove the desktop shelf from the 

desk.

Summary of Contents for 865XTW









Reviews:

No comments