Mounting the Shelf Bottom Support Panel
Mounting the Outer Panel
Mounting the Desktop Panel
Adjusting the Desk Height
Mounting the Desktop Panel
Downward
Screw-type connector
Shelf bottom
support panel
Rear panel
Desktop
Bag hook
This side down
Left outer panel
Left outer panel
Right outer panel
Right inner panel
Bring this surface into
contact with the outer
panel.
Screw-type
connector
Rear panel
Rear panel
Paper measure
Desktop
Align here
Inner panel
Align the top surface of the
inner panel with the scale.
Right outer panel
Right outer panel
Shelf bottom
support panel
Shelf bottom
support panel
Mount the shelf bottom support panel to the rear
panel, and firmly tighten the screw-type connectors.
Reposition the part that was assembled in step 3, place the
desktop panel on top and mount using the connecting bolts .
Insert between the connecting bolts and side panel when
mounting.
To adjust the desk height, use
the supplied paper measure.
With the desk flipped backward,
align the black part of the paper
measure with the desktop
panel, and adjust the top
surface of the inner panel to
match the number line for the
height of the child.
After aligning, assemble the
right and left sides until
mounting of the inner panel for
step 7. (This figure shows
assembly from the right side
panel.)
Flip over the desk where the desktop panel was
mounted, insert the connecting bolts from the
position in the figure, and firmly tighten.
Mount the part assembled in step
2 to the right outer panel, and
firmly tighten the screw-type
connector.
Mount the left outer panel to the
part assembled with the right
outer panel, and firmly tighten the
screw-type connector.
* Mount so that the
sticker is facing
downward.
* Determine the desk height
(size number) by referring
to page 3.
* When mounting the inner
panel, orient so that the
sticker is facing the outer
panel side.