For Your Safety (Please observe the safety precautions)
Caution
Warning
Caution
Warning
Assembly precautions
Handling precautions
To ensure proper assembly, carefully read and
understand this manual beforehand, use a
screwdriver to securely tighten all bolts, and
make sure to use all of the specified parts.
Do not use an electric screwdriver for
assembly. If too much force is applied, it could
damage the product or make it impossible to
remove the bolts later.
Depending on the type of assembly, there may be
some unused parts or materials left over. Store
these items carefully, as they may be required when
reconfiguring the product If any parts become lost,
they will need to be repurchased.
After assembly, place the product on a level
surface, securely tighten all bolts, and make
sure that all parts are securely attached.
Do not handle the product roughly, and do not
use it for any purpose other than the intended
use. Never climb or lean heavily on the
product. Doing so may damage the product or
cause it to fall over.
A newly purchased product may smell of the
substances used in the adhesives and coating.
Periodically ventilate the room until the smell
subsides.
Before detaching the top section of the
separable wagon, make sure that the arrows
on the screw-type connectors are pointing
down.
This denotes information about a situation that may result in injury or physical
damage if the caution is ignored or the product is used improperly.
This denotes information about a potentially hazardous situation that may result in
death or serious injury if the warning is ignored or the product is used improperly.
Before assembling the configurable desk, first
measure the user's height to determine the
height of the desktop.
If you notice any sparks or unusual smells,
immediately turn off the switch and
disconnect the power plug from the outlet.
Never insert metal objects (hairpins, wire,
etc.) into the light fixtures or sockets.
Doing so may result in electric shock.
Do not forcibly bend or pull on the power
cord. Doing so may damage the cord or
cause a fire or electric shock.
Do not allow water to come in contact with
the power plug, and do not handle it with
wet hands or while standing in a wet place.
Doing so may result in electric shock.
Never allow the person other than the
repair engineers to disassemble, repair
and reassemble the equipment. Doing so
may result in breakdown or accident.
Dust or debris around the power plug or
outlet may cause a fire. Wipe the area with
a soft dry cloth to keep it clean.
Make sure to disconnect the power plug
from the outlet when replacing fluorescent
or incandescent light bulbs. There is no
need to replace LED light elements.
Disconnect the power plug from the outlet
if you do not plan to use the light for an
extended period of time.
When locking and unlocking the lock, make
sure to fully insert the key before turning it.
Also, take care not to forcibly turn the key too
far, as it could damage the lock or key.
The lock on this desk does not guarantee
protection against being intentionally broken or
picked. Do not use the desk to store valuable
items.
When placing objects on the desk, make sure not to
exceed the maximum load weight. If the maximum load
weight is exceeded, it may damage the desk or cause
it to fall over.
The maximum load weight of the
desktop is 40 kg
(evenly distributed static load).
Observe the following precautions for electric lights and power outlets.
Failure to do so may result in electric shock or fire.