C
C
3
Ausrichten
des Basisschrankes
Align
of the base cabinet
Richten
van de basiskast
3
.
1
Beschlagselemente
Fittings
Beslagelementen
Werkzeug
Tools
Gereedschap
C
Ø 12 mm
Höhenjustierung mittels Inbusschlüssel
über Sockelrahmen vornehmen,
Abdeckkappen
C
aufsetzen;
Abb. 3.1
Adjust the height with the Allen key over the
base frame,
Fit the cover caps
C
;
Fig. 3.1
Pas de hoogte aan met de sleutelbout
boven het basisframe,
Monteer de kapjes
C
;
Afb. 3.1
SW 5
4
Montage
des Aufsatzschrankes
Assembly
of the cabinet
Montage
van de kast
Ø 12 mm
4,5 x 35 SK
A
B
C
Beschlagselemente
Fittings
Beslagelementen
Aufsatzschrank auf den Basisschrank
setzen und beide Schränke zueinander
ausrichten.
Abb. 4.1
Von den Sacklochbohrungen im Oberboden
des Basisschrankes mittels 4 Spaxschrau-
ben
A
die Verbindung zum Aufsatzschrank
herstellen, Abdeckkappen
B
aufstecken.
Abb. 4.1
Place the cabinet on the base cabinet and
align both cabinets with each other.
Fig. 4.1
Connect the blind holes in the upper floor
of the base cabinet with 4 spax-screws
A
to connect the connection to the upper
cabinet, attach the
B
caps.
Fig. 4.1
Plaats de kast op de basiskast en sluit
beide kasten met elkaar in elkaar.
Afb. 4.1
Sluit de blinde gaten in de bovenverdieping
aan van de basiskast met 4 spakschroeven
A
om de aansluiting op de bovenste kast
aan te sluiten, bevestig de
B
kapjes.
Afb.4.1
Werkzeug
Tools
Gereedschap
4
.
1
4xA
4xB
4xC
4
.
2
OKA ModulLine