![background image](http://html.mh-extra.com/html/ok/ovc-105/ovc-105_user-manual_727734009.webp)
5
en
ASSEMBLING THE VACUUM CLEANER
1
Insert the suction hose into the hose connection and rotate it to the right (bayonet lock). Make sure
that it has clicked into place.
2
Place the floor nozzle on the lower end and the suction tube handle on the upper end of the
telescopic tube.
3
Adjust the telescopic tube to the desired length, by pressing the locking mechanism down and
then pushing the telescopic tube out or squeezing it together.
USE OF THE ACCESSORIES PROVIDED
Combination nozzle
4
To vacuum hard floors, press the toggle switch down.
5
To vacuum carpeted areas, press the toggle switch again in order to retract the brushes.
Upholstery nozzle
6
For vacuuming upholstered furniture, mattresses, cushions, curtains, etc.
Crevice nozzle
7
For vacuuming folds, crevices and corners.
OPERATION
8
Pull out the connection cable to the desired length and insert the power plug into a receptacle.
9
Press the On/Off switch to turn the vacuum cleaner on/off. Use the suction power control to set the
desired suction power.
Tip: If the vacuum can only be guided with difficulty over carpeted areas due to excessively high
suction power, adjust the suction power down, by reducing the power by means of the suction
power control or by opening the
auxiliary air flap
on the handle.
10
Switch the vacuum cleaner off after use and unplug it when you have finished working.
11
Wind the power cable around the cable storage device by pressing the automatic cable retraction
switch. While you are doing this keep the cable taut, if possible.
Parking system for pauses in vacuuming
12
You can store the telescopic tube with the combination nozzle on the vacuum cleaner for short
pauses in vacuuming. Insert the combination nozzle with the parking attachments into the parking
system.
Transport and storage
13
To carry your vacuum cleaner grasp it by the handle in the hollow in the dust canister lid. To store
your vacuum cleaner, the suction tube with the floor nozzle can be mounted on the back of the
vacuum cleaner in an upright position.
IM_OVC105_141113_V01_HR.indb 5
14/11/14 3:54 PM