6
en
CLEANING AND CARE
Warning!
When cleaning, never use solvents or abrasive materials, hard brushes, metallic or sharp
objects. Solvents are harmful to human health and can attack plastic parts, while abrasive
cleaning mechanisms and tools may scratch the surface(s).
Warning!
Never immerse any electrical parts of the product in water or in other liquids during
cleaning. Never place it under running water.
Emptying the dust canister
14
If the suction power diminishes, the dust canister must be emptied and the filters must be cleaned.
Remove the suction hose from the dust canister. Press the unlocking device and remove the filter
by bringing it forward. To empty the dust canister, simply press the release on the bottom so that
the bottom of the canister opens and the dust falls out. Hold the dust canister over a rubbish
container whilst you are emptying it.
Cleaning the main filter
15
Loosen the filter lid and remove the entire filter insert from the dust canister. Break down the filter
into all of its individual parts. Clean all of the parts thoroughly and tap the filter to remove the dust.
Cleaning the motor filter
16
Remove the motor filter and tap it to remove the dust. Then re-insert it.
Warning: Never use the vacuum cleaner without a motor filter, as otherwise, the motor will soon
get dirty and will be subject to wear. If the motor filter gets dirty, the suction power will diminish.
Reassemble all of the components that have previously been removed. Assembly is carried out in
reverse order.
Cleaning the exhaust air filter
17
Open the flap, take the filter out and tap it to remove the dust. Assembly is carried out in reverse
order. Insert the filter in the right direction so that the correct side is facing the motor.
SPECIFICATION
Rated voltage
220 - 240 V~ 50/60 Hz
Rated power input
1000 W
Protection class
II
• This is a general purpose vacuum cleaner
• The Erp test method is according to EN 60312-1:2013
• Please refer to below website for detail technical information, or contact the manufacturer for
technical document: www.ok-online.com
DISPOSAL
The crossed-out wheeled bin logo requires the separate collection of waste electric and
electronic equipment (WEEE). Electric and electronic equipment may contain dangerous and
hazardous substances. Do not dispose of this appliance as unsorted municipal waste. Return it
to a designated collection point for the recycling of WEEE. By doing so, you will help to conserve
resources and protect the environment. Contact your retailer or local authorities for more
information.
IM_OVC105_141113_V01_HR.indb 6
14/11/14 3:54 PM
