12
EN
12.
Clean the product and all other accessories after each use.
13.
Follow the instructions in the chapter Cleaning and care.
14.
Read this user manual thoroughly before first use and pass it on with the product. Pay attention to
the warnings on the product and in this user manual. It contains important information for your
safety as well as for the use and maintenance of the equipment.
15.
Never leave the product unsupervised while it is switched on.
16.
Do not place heavy objects on top of the product.
17.
Never immerse electrical parts of the product in water during cleaning or operation. Never hold the
product under running water.
18.
Do not under any circumstances attempt (e.g. damage in power cord, product is dropped, etc.) to
repair the product yourself. For servicing and repairs, please consult an authorised service agent.
19.
The mains voltage must match the information on the rating label of the product.
20.
Only unplug from the power socket can separate the product completely from the mains. Please be
sure that the power plug is in operable condition.
21.
Avoid damages to the power cord that may be caused by kinks or contact with sharp corners.
22.
Keep this product including power cord and power plug away from all heat sources like for
example, ovens, hot plates and other heat-producing products/objects.
23.
Only unplug from the power socket by the plug itself. Do not pull on the cord.
24.
Unplug the product ...
- when the product is not being used,
- in case of malfunctions,
- before attaching / detaching accessories and
- before cleaning the product.
25.
Use this product in dry indoor areas only and never outdoors.
26.
Place the product on a flat, sturdy and slip-resistant surface.
27.
Never use, expose or put the product near to:
- direct sunlight and dust;
- fire (fireplace, grill, candles), water (water splashes, vases, ponds, bath tube) or heavy moisture.
28.
This product is not intended for commercial use. It is designed for household use only.
29.
Never operate the product when it is empty.
30.
Do not allow the product to operate unsupervised.
31.
Make sure that the motor unit and supply cord do not become wet.
IM_OMS103_140805_V05_HR.indb 12
5/8/14 10:59 AM