14
EN
12
Unplug the power plug from the power outlet.
NOTE: Do not continuously using the slicer longer than 5 minutes. Allow the product to cool down.
CAUTION:
• Before replacing any accessories always disconnect the product from the mains.
• Blade is very sharp!
CLEANING AND CARE
• Warning! Unplug the product and let it cool down completely before cleaning. Never immerse
electrical parts of the product in water during cleaning or operation. Never hold the product under
running water.
• Warning! When cleaning, never use solvents or abrasive materials, hard brushes, metallic or sharp
objects. Solvents are harmful to human health and can attack plastic parts, while abrasive cleaning
mechanisms and tools may scratch the surface(s).
13
Clean the product’s exterior surfaces with a slightly damp cloth and then dry them thoroughly.
Make sure that no water enters the product interior (for example, through the switch). Keep the
product in a dry, cool location which is protected against moisture and direct sunlight. Keep this
product out of the reach of children.
Clean cutting blade
14
Carefully remove the cutting unit. Caution! Blade is very sharp! Turn the blade assembly knob
clockwise to unlock it.
15
Now you can clean the cutting blade, slide feeding table and food holder with hand rest with water
and a soft cleaning detergent. Dry all parts.
16
After cleaning re-insert the cutting blade. Turn the assembly knob counter-clockwise to lock it.
SPECIFICATION
Rated voltage
: 220-240 V~, 50 Hz
Rated power input : 150 W
Operation time
: max. 5 minutes
Protection Class
: Class II
DISPOSAL
Do not dispose of this appliance as unsorted municipal waste. Return it to a designated
collection point for the recycling of WEEE. By doing so, you will help to conserve resources and
protect the environment. Contact your retailer or local authorities for more information.
IM_OMS103_140805_V05_HR.indb 14
5/8/14 10:59 AM
