SDMIVD35-55AIDN_ SDVD-55AIDN_rev09192008
4
A. Focus Adjustment – The default setting for zoom position is WIDE.
x
IR Day & Night ICR Focus Adjustment:
o
Loosen the zoom ring thumbscrew
o
Turn the zoom ring to set to the desired zoom
o
Tighten the zoom ring thumbscrew
o
Use the screw driver to loosen the focus ring thumbscrew
o
Turn the IR LED board to set to the desired focus
o
Use screw driver to tighten the focus ring thumbscrew
x
Hi-Res. Focus Adjustment:
o
Loosen the zoom ring thumbscrew
o
Turn the zoom ring to set to the desired zoom
o
Tighten the zoom ring thumbscrew
o
Loosen the focus ring thumbscrew
o
Turn the focus ring to set to the desired focus
o
Tighten the focus ring thumbscrew
B. Angle Adjustment
3-AXIS mechanical design allows 90° side views for wall mount and furthest angle for ceiling mount when guarding a
hallway. Horizontal angle adjustment: Turn the platform to adjust the horizontal angle 180°~300°. Vertical angle
adjustment: Turn the platforms to adjust the vertical angle 90°.
Step 5: Auto Iris Level Adjustment
You will need to set the level volume when shooting in the condition described below.
x
If shooting simultaneously in a dark room and through a bright window
x
If the subject background is extremely bright or dark
x
If the brightness of the picture on the monitor is not correct
L (counter-clockwise) to decrease the contrast
H (clockwise) to increase the contrast
