Oilon Lampoassa RE 28-48, Installation And Operation Manual

Page: 8 / 78

1.5 Transportation and storage
Storage
Store the unit upright in a warm, dry place. Protect the device against water and dust.
Do not stack goods on the unit.
Transportation
Transport the unit upright and protected against water and dust. Do not stack goods
on the unit. Use only safe lifting and handling methods when moving or lifting the
unit. After lifting, lower the unit carefully down onto the floor. Hard impacts can cause
equipment damage.
Do not tilt the unit.
● If the unit is tilted beyond 45 degrees, the compressor may not receive proper
lubrication at startup. As a result, the compressor may become damaged.
● If the unit has been accidentally tilted beyond 45 degrees, leave the unit in vertical
position for at least three hours before starting the compressor.
Lifting
Lift and move the unit with a hand pallet truck or forklift.
● Lift and move the unit only so that both forks of the lifting device extend under the
whole unit.
● Keep the exterior panels of the compressor unit closed when lifting and moving the
heat pump.
● Do not lift the unit from under the control cabinet.
● Do not use the user interfaces as support points when lifting the unit.
Two-unit heat pumps:
Lift the tower consisting of two units only from below the lower unit.
6 (74) M8009 2147EN