10
10090943EN
4.2. Hinged Burner Housing
As standard the burner can be hinged to both sides.
4.3. Electric
Connections
The burner must be connected according to the electrical diagrams delivered together with the
burner. General and local standards and regulations as well as requirements of electrical
equipment on electrical connections must be adhered to.
4.4. Connecting the Burner to the Mains
Electrical connection on burner is with a plug connector. Connect the cable of the plug supplied
with the burner to the boiler thermostat or pressurestat. The socket has been firmly attached to
the burner housing. Disconnect the burner from the mains (burner switch in position 0) by
pressing the locking button and pulling out the plug from the socket at the same time.
1 Socket (fixed on the burner
housing)
2 Locking button
3 Plug (pull-out part)
CAUTION!
Disconnect the plug connector before burner maintenance or removal from
the boiler.
