Start heatpump
Start the heat pump either using this option or later from the
Service
menu.
Off
The heat pump is switched off.
Used
The heat pump is switched on.
Operating mode
Additional heater only
Only the unit’s internal electric immersion heater is used for heating. The
compressor and the brine circuit are not in use.
Setup finished
Hide initial setup
menu
Once the commissioning process is complete, hide the
Initial setup
menu. If
necessary, display the menu again from the
Service
menu.
Design outdoor temperature
The information below applies to Finland, and is provided for reference only.
Weather Zones FInland ver. 1
Weather zone
(in Finland)
Design outdoor
temperature, °C
I
−26
II
−29
III
−32
IV
−38
References:
Lämmitys- ja ilmanvaihtolaitteiden suunnittelun normaaliohjeet. LVTY, 1966, Lämpö- ja vesijohtoteknillinen
yhdistys r.y., Helsinki, Finland.
National Building Code of Finland, part D5 1985-2007; part D3 2012.
Ympäristöministeriön asetus uuden rakennuksen energiatehokkuudesta, Finlex: 1010/2017
Test reference year 2012 for building energy demand and impacts of climate change, Finnish
meteorological institute, reports 2011:6, Sitra Reports 53
Weather data for building - physical studies and the building energy reference year 2020 in a changing
climate, Finnish meteorological institute, reports 2020:6
M8006 2123EN
37 (54)
