Black
IC-SLDCP6
14
Cleaning and maintenance
Continue
Dust collection head
when garbage is piled up
•
If there is rubbish accumulation in the rotating
brush and the suction port, clean it with tweezers,
etc.
•
If there is rubbish accumulation inside the vacuum
cleaner, the suction will be reduced.
Please check regularly and use tweezers or
disposable chopsticks to clean up when you find
garbage.
Holder of the dust collection bag
when it is visually dirty
•
When the holder of the dust collection bag is dirty,
please wash it with water and dry it thoroughly.
Wash with water
Revolving brush
when the dirt is obvious
1
Remove the brush cover
•
Use a coin or the like to screw the lock cover of the
brush cover to the direction of unlocking (
) and
remove brush cover.
Brush cover
2
Remove the revolving brush
①
Lift the belt side of the revolving brush and remove
the belt.
②
Pull the revolving brush to the side of the belt and
remove it from the rotating shaft on the opposite side.
①
②
Remove the belt
3
Wash the revolving brush with clear water
※
If the revolving brush is tangled, use scissors or
tweezers to clean it before water-washing.
•
Please dry it thoroughly after water-washing.
