–
３
–
①
③
④
②
Precautions in Ejecting Screws
Please use maximum care in ejecting screws from the Screw bin for changing screw types, replacing the rail and so forth.
◎
Screws could fall into the inside of this machine if ejection is mishandled.
◎
If this machine is tilted or turned back with screws being accumulated at the unloading port or left on the rail, screws may fall into
the inside of this machine.
◎
Unload screws from the unloading port and move all screws from the rail to the screw bin, take them from the chamber.
◎
See the illustrations below for ejecting screws. Use maximum care in ejecting screws from the screw bin not to let them fall into
the inside of this machine.
①
Turn off the power switch.
②
Unload screws from the unloading lever.
③
Tilt the machine backyards,and slide all the screws from the rail back to the screw bin.
Check that no screws are left at the unloading port and on the rail before
ejecting screws from the screw bin.
④
Eject the screws from the screw bin.
