manualshive.com logo in svg

Ohmeda Ohio Care Plus, Operation And Maintenance Manual

Share
Download
Ohmeda Ohio Care Plus Operation And Maintenance Manual Download Page 69

8/Illustrated Parts

8-3  8-3

6600-0239-000  100

Accessories (continued)

Item 

Stock Number

Duo-O-Vac (North American) ............................................................................................... 6700-0136-900
Duo-O-Vac Rail Mounting Kit (North American) ........................................................... 6600-0018-800
3.5 Inch Utility Post .................................................................................................................. 0217-5374-800
22 Inch Utility Post ................................................................................................................... 0217-5376-800
Vacuum Bottle Slide Bracket ................................................................................................ 0217-5367-800
Adapter Plate Assembly ......................................................................................................... 0217-5363-800
BiliBlanket Phototherapy System, 120 V .......................................................................... 6600-0104-900
Phototherapy Light II (Free Standing), 120 V ................................................................. 6600-0029-900
Phototherapy Light II (Rail/Wall Mounting), 120 V ....................................................... 6600-0055-900
Phototherapy Light II Rail Mounting Kit .......................................................................... 6600-0051-800
1/4 Gal., Shatter Resistant Collection Bottle ................................................................... 0212-0300-600
Collection Bottle Bracket ....................................................................................................... 0221-6267-300
Collection Bottle Cap and Float Assembly ...................................................................... 0221-6285-300
Pleur-Evac Hanger Kit ............................................................................................................. 6600-0115-800
Iris Porthole kit (2/pkg) ........................................................................................................... 6600-0498-800
Wristlets (6/pkg) ........................................................................................................................ 6600-0507-500
Porthole Cuff for Ventilator tubing, ( 2/pkg) ................................................................... 0217-3955-600
Porthole Seal Kit (6 seals/pkg) ............................................................................................. 6600-0221-800
Power Strip (4 outlet) 110V ................................................................................................... 6600-0414-800
Service manual .......................................................................................................................... 6600-0017-000
Controller Cleaning tank ........................................................................................................ 6600-0202-500
Cavicide, 8 oz bottle (12/pkg) .............................................................................................. 6600-0468-801
Cavicide, 24 oz bottle (12/pkg) ............................................................................................ 6600-0468-802
Cavicide, 1 gal  bottle (4/pkg) .............................................................................................. 6600-0468-803
Cavicide, 5 gal container ........................................................................................................ 6600-0468-804

For more information about these and other accessories see the 

Infant Care Equipment Accessories Catalog (Form No F058)

 

Summary of Contents for Ohio Care Plus





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands