3/Maintenance
3-3
3-3
6600 0341 000
04/25/00
Note: Do not touch the center glass bulb or the mirror surface with your fingers. Con-
tamination of the bulb may result in reduced lamp performance. If the bulb is touched
during installation or if stains are noted, clean the bulb with alcohol and dry with a
clean, soft cloth. Also, take care not to let the bulb wires touch the reflector when it is
hot.
Refer to figure 3-1
1.
Switch off the light source and disconnect the power cord from the power
source.
2.
Turn the screw on the bulb access door one quarter turn counter-clockwise
and open the door.
3.
Gently move the lever next to the bulb from right to left, moving the lever and
the bulb outward. Disconnect the connector, remove the bulb, and discard.
4.
Move the lever back to its original position.
5.
Firmly slide the bulb all the way into the socket until it “clicks” into position.
Connect the pins of the new bulb into the bulb connector.
6.
Close the lamp access panel and turn the panel screw a quarter turn
clockwise.
WARNING
w
w
w
w
w
Do not operate the lamp with the protective compartment door open. The
lamp operates under pressure and high temperature and may shatter.
7.
Perform the checkout procedure detailed in section 2/Operation.
Bulb
Lever
CI.17.011
Figure 3-1
Bulb replacement
CAUTION
w
Lamp life is greatly reduced if the lamp or the light source is subjected to shock
or bumping, or if the unit is moved while the bulb is hot. Allow the bulb to cool
for at least ten minutes before moving the unit.
Bulb connector
Bulb
Compartment
Summary of Contents for BiliBlanket Plus
