1/General Information
1-1
1-1
6600 0341 000
04/25/00
1/General Information
In this Section
Description ................................................................................................................... 1-1
Light source controls, indicators and connectors ......................................................... 1-4
Light source and pad ........................................................................................... 1-4
Light source back panel ...................................................................................... 1-5
Accessories and replacement parts ............................................................................. 1-5
WARNING
w
w
w
w
w
Do not turn on or operate the BiliBlanket Plus High Output Phototherapy
System in the presence of a flammable anesthetics; a possible explosion
hazard exists under these conditions.
General
Information
This manual describes how to checkout, operate and maintain the Ohmeda BiliBlanket
Plus High Output Phototherapy System. It also describes for the technically competent
person how to service the BiliBlanket Plus High Output.
Before using the BiliBlanket Plus High Output Phototherapy System
• Read through sections one through three of this manual.
• Pay special attention to the Warnings and Cautions which appear in the manual.
• Read the User Responsibility statement located on the inside front cover; it de-
scribes what is expected of the user to maintain a safe and accurate product.
• Read the Warranty; it describes Ohmeda’s responsibility in case of a functional
defect.
Keep this manual available for answering questions which may arise.
Description
The new BiliBlanket Plus High Output pad, which can be identified by the gray cable,
provides higher intensity levels than the original BiliBlanket Plus High Output pad with the
white cable. Both pads can be used with the BiliBlanket Plus High Output or BiliBlanket
Plus High Output light source box, however, the pad with the white cable will provide lower
intensity levels.
The Ohmeda BiliBlanket Plus High Output Phototherapy System uses a fiber optic cable
to deliver light from a high intensity lamp to a woven fiber optic pad. The pad is placed in a
disposable cover that is in contact with the patient. The patient is exposed to light in the
ideal 400 to 550 nanometer range for phototherapy treatment.
On units with the transilluminator option, unfiltered light in the visible spectrum travels
through a flexible light pipe to appear at the tip of the transilluminator cable. The light from
the cable is used to facilitate vascular sticks or injections. It is also used to find pneu-
mothoraces.
The BiliBlanket Plus High Output Phototherapy system consists of a light source unit and
a light pad with a four foot long fiber optic cable. The light source unit contains a lamp, light
filters, a variable power supply for the light source, a cooling system and overheating
protection near the lamp.
The light source lamp is a high intensity, tungsten halogen bulb with a built-in reflector.
The reflector is coated with a dichroic surface which reduces the infrared energy
transmitted. This bulb is specifically manufactured for use with the BiliBlanket Plus High
Output.
Summary of Contents for BiliBlanket Plus
