OHM CRED Mark 2 2-4, User Manual

Page: 5 / 30

CRED Mark 2 2-4/2-6
Channel Select Buttons
The currently selected input or output channel is shown in the top left corner of the display. Pressing
the channel select buttons scrolls through the available inputs and outputs. If operating stereo linked
the channel pair is shown. For example ‘CH A+B’ means both input A and B parameters.
Display
The LCD Displays preset and parameter information. The default screen is shown after start up and
displays the number of the current preset on the lower line of text. When navigating around the
adjustable parameters, other information is shown.
Edit Select Buttons
The name of the edit parameter page is displayed in the bottom left portion of the LCD. Pressing the
edit select buttons moves through the available parameter pages for the current input or output.
Mute Buttons
The LEDs next to the mute buttons indicate their current status. Pressing a mute button toggles
between the mute on and off.
Parameter Knobs
Up to three parameters are shown on the display. The parameter name is shown with its' current
value below. Where appropriate, parameters are grouped according to function. For example the
parametric equalisation page shows centre frequency, width and gain. Turning a parameter knob
clockwise will increase the value of a parameter, turning anti-clockwise will decrease it. Turning a
knob rapidly will cause the action to 'accelerate', so the value changes more rapidly.
Store Button
The unit has 45 preset locations. To store a preset in a location, press the store button and use the
parameter knobs to select the preset location and name the preset. Pressing the store button again
completes the task. Pressing any button other than store during the process cancels the procedure.
Recall Button
To recall a preset, press the recall button and use parameter knob A to select the required preset.
Pressing the recall button again will activate the preset. You will then be asked to confirm by pressing
recall once more. As with the store function, pressing any button other will cancel the process.
Quick Reference
5