OHM CRED Mark 2 2-4, User Manual

Page: 2 / 30

2
WARNING! RISK OF HAZARDOUS ENERGY!
TO REDUCE RISK OF ELECTRIC SHOCK OR FIRE DO NOT
EXPOSE TO RAIN OR MOISTURE.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
UNIT MUST BE EARTHED AND CORRECTLY FUSED.
Magnetic Field - Caution
If an equipment rack is to be used, we would
recommend mounting the amplifiers in the bottom of
the rack and mounting pre-amplifier and other
sensitive equipment such as the Cred Mk2 at the top
of the rack.
Do not locate sensitive high-gain equipment such as
pre- amplifier or tape decks directly above or below
amplifiers.
Because amplifiers have a high power density there is
a strong magnetic field which can induce hum into
unshielded devices that are located nearby. The field
is strongest just above and below the unit.
Features
!
!
!
!
Linea Research minimal signal path design
Sonically
superb ADC/DAC combination; a
carefully matched pairing of the best devices from
Burr Brown and Wolfson
Newly released family of Analogue Devices SHARC
DSP
Extended bandwidth; 96kHz sampling frequency
provides for a nominally flat response to 40kHz.
USER MANUAL
CRED MARK 2
The information contained within this manual does not include all of the details of design, production or
variations of the equipment.
Nor does it cover every possible situation that may arise during installation,
operation or maintenance. If you need particular assistance beyond the scope of this manual please contact our
technical staff.
Wellington Close • Parkgate • Knutsford
Cheshire • WA16 8XL • England
Tel: +44 (0)1565 654641 • Fax: +44 (0)1565 755641
Email: info@ohm.co.uk • Website: www.ohm.co.uk
CE Conformity
This equipment has been tested and found to conform
to the requirements of the EMC Directive 89/336/EEC,
the requirements of the Low Voltage Directive
73/23/EEC, amended by 93/68/EEC and to the
following standards:
EMC Emission EN55103-1 (1996)
EMC Immunity EN55103-2 (1996)
Electrical Safety EN60065 (1998)
The lightning bolt triangle is used to alert
the user to the presence of un-insulated
“dangerous voltage” within the unit that
may constitute a risk of electric shock. The exclamation mark triangle is used to
alert the user to important operating or
maintenance
instructions in the
literature accompanying the product.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION