OHM ELECTRIC Cool Cabi OCA-S1300BCD-A200, Instruction Manual

Page: 29 / 48

5
3-2 Mounting procedure (This product is for external mounting only.)
(1) Process the mounting surface to cut out the openings in accordance with the respective
mounting cutout drawings in Page 6.
(2) Fit the enclosed bolts to the unit. The number of bolts differs depending on the model.
(3) Attach the enclosed packing on the rear side of the unit. Affix metallic packing outside
the fixing bolts as shown in the drawing of Page 7.
(4) Align the unit to fit the cutouts.
(5) Fit the washers and the nuts from inside the control panel and secure them.
(6) To ensure keep the panel interior airtight, caulk the gaps completely, if any.
(7) Apply the enclosed
“ Alarm description label ” to an appropriate place where readily visible.
Illustrated mounting procedure (Ex. OCA-S1300BCD-A200)
Caution
OCA-S700BCD-A200,
OCA-S1300BCD-A200 and
OCA-S2300BCD-A200 has two nuts
on top for installation of eyebolts.
Please lift up evenly using eyebolts
whenever lifting up a cooling unit.
Lifting up one side only may result in
breakdown or damage of the product.
Alarm description label
COOLCAB
I
Mounting surface
with cutouts
Washer
Nut
Packing
Fixing bolt
Spring washer
Nut for eyebolt
installation