OHM ELECTRIC COOL CABI OCA-H300BC-AW2, Instruction Manual

Page: 59 / 88

59
3 Condensate-free Lateral mounting type
OCA-H35 BCD-AW OCA-H7 BCD-AW
OCA-H 3 BCD-AW OCA-H 3 BCD-AW
10. Warranty
This product is covered with -year warranty from the date of shipment, provided that such warranty does not apply
to damages and malfunctions resulted from other than normal use.
11. Waste disposal
Dispose of the product so as to comply with all the related laws and regulations of your country.
When removing refrigerant from a system for decommissioning, it is recommended good practice that all refrigerants
are removed safely. When transferring refrigerant into cylinders, ensure that only appropriate refrigerant recovery
cylinders are employed. Ensure that the correct number of cylinders for holding the total system charge is available. All
cylinders to be used are designated for the recovered refrigerant and labelled for that refrigerant i.e. special cylinders
for the recovery of refrigerant . Cylinders shall be complete with pressure-relief valve and associated shut-off valves in
good working order. Empty recovery cylinders are evacuated and, if possible, cooled before recovery occurs.
The recovery equipment shall be in good working order with a set of instructions concerning the equipment that is at
hand and shall be suitable for the recovery of all appropriate refrigerants including, when applicable, flammable
refrigerants. In addition, a set of calibrated weighing scales shall be available and in good working order. Hoses shall
be complete with leak-free disconnect couplings and in good condition. Before using the recovery machine, check that
it is in satisfactory working order, has been properly maintained and that any associated electrical components are
sealed to prevent ignition in the event of a refrigerant release. Consult manufacturer if in doubt.
The recovered refrigerant shall be returned to the refrigerant supplier in the correct recovery cylinder, and the relevant
waste transfer note arranged. Do not mix refrigerants in recovery units and especially not in cylinders.
If compressors or compressor oils are to be removed, ensure that they have been evacuated to an acceptable level to
make certain that flammable refrigerant does not remain within the lubricant. The evacuation process shall be carried
out prior to returning the compressor to the suppliers. When oil is drained from a system, it shall be carried out safely.
Danger
High concentration of refrigerant is harmful to human body.
The refrigerant is heavier than air, and therefore, can stay on the floor if it is discharged at a poorly
ventilated place.
or discharging, avoid a place where fire is used or ignition sources such as cigarette lighters or electric
components exist and evacuate refrigerant a small amount at a time.
Do not discharge refrigerant toward a person.
If inhales, be sure to go to a doctor to get a diagnosis.